- ページ 31

換気フード Electrolux DVK6010WEのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux DVK6010WE 36 ページ。
Electrolux DVK6010WE にも：取扱説明書 (36 ページ)

3.4 - Connecting suction or filter hoods

1 - Connecting suction hoods (air is discharged into the atmosphere)

The hood comes with two air outlets, a plastic cover fitted in the

rear hole and a flange to be fitted according to the solution chosen:

top discharge (fig. 8), rear discharge (fig. 9). In case of installation

with rear discharge, fit the plastic cover in the top hole and the

flange in the rear hole. Using a pipe Ø 100 o 120 mm, connect the

air discharge flange to the external discharge duct. Open the grid

panel by pressing inwards on the knobs (fig. 10), check that the lever

(hood with one motor) or the handle (hood with two motors) points

to the ducting mode position (fig. 11), remove the charcoal filter, if

any, by turning the handle anti-clockwise (see par.3.3 2 part 2°).

Respect warning 2.1

2 - Connecting filter hoods (air is filtered and recirculated inside the

room) Open the grid panel, check that the lever (hood with one

motor) or the handle (hood with two motors) points to the filter mode

position (fig. 11), insert the charcoal filter

2°).

3.5 - Electrical connection and working test

Once the electrical connection has been completed, check that the worktop illumination, motor

and speeds work properly.

(see par.3.3 2 part