- ページ 4

ドリル Bosch PSR 14のPDF オリジナル取扱説明書をオンラインで閲覧またはダウンロードできます。Bosch PSR 14 6 ページ。 Cordless drill/driver
Bosch PSR 14 にも：オリジナル・インストラクション (5 ページ), オリジナル取扱説明書 (41 ページ), 取扱説明書 (10 ページ)

ページを印刷する

OBJ_BUCH-1338-002.book Page 9 Monday, May 16, 2011 3:55 PM

Safety Warnings for Drills and Screw-

driver

Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory

or fastener may contact hidden wiring. Cutting accesso-

ry and fasteners contacting a "live" wire may make ex-

posed metal parts of the power tool "live" and could give

the operator an electric shock.

Use appropriate detectors to determine if utility lines

are hidden in the work area or call the local utility com-

pany for assistance. Contact with electric lines can lead to

fire and electric shock. Damaging a gas line can lead to ex-

plosion. Penetrating a water line causes property damage.

Switch off the power tool immediately when the tool in-

sert jams. Be prepared for high reaction torque that

can cause kickback. The tool insert jams when:

— the power tool is subject to overload or

— it becomes wedged in the workpiece.

Hold the machine with a firm grip. High reaction torque

can briefly occur while driving in and loosening screws.

Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

Do not open the battery. Danger of short-circuiting.

Protect the battery against heat, e. g., against

continuous intense sunlight, fire, water, and

moisture. Danger of explosion.

In case of damage and improper use of the battery, va-

pours may be emitted. Provide for fresh air and seek

medical help in case of complaints. The vapours can irri-

tate the respiratory system.

Use the battery only in conjunction with your Bosch

power tool. This measure alone protects the battery

against dangerous overload.

Use only original Bosch batteries with the voltage list-

ed on the nameplate of your power tool. When using oth-

er batteries, e. g. imitations, reconditioned batteries or

other brands, there is danger of injury as well as property

damage through exploding batteries.

Additional Safety and Working

Instructions

Dusts from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one's health and cause allergic reactions, lead to respi-

ratory infections and/or cancer. Materials containing as-

bestos may only be worked by specialists.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the

materials to be worked.

Prevent dust accumulation at the workplace. Dusts can

easily ignite.

Before any work on the machine (e. g., maintenance,

tool change, etc.) as well as during transport and stor-

Bosch Power Tools

age, set the rotational direction switch to the centre

position. Unintentional actuation of the On/Off switch can

lead to injuries.

The battery is supplied partially charged. To ensure full

battery capacity, completely charge the battery in the

battery charger before using for the first time.

Read the operating instructions of the battery charger.

Apply the power tool to the screw only when it is

switched off. Rotating tool inserts can slip off.

During the driving-in procedure, the LED indicator dis-

plays the currently effective torque – see figure 5,

page 68.

The power tool switches off automatically as soon as

the set torque is reached. The LED indicator flashes 3 x.

After releasing the On/Off switch, the LED indicator in-

dicates the last effective torque. For serial screwdriv-

ing applications, set the torque slide to this value.

When the On/Off switch is pressed halfway or com-

pletely, the battery charge-control indicator indicates

the charge condition of the battery for several sec-

onds. It consists of 3 green LEDs.

LED

Continuous lighting 3 x green

Continuous lighting 2 x green

Continuous lighting 1 x green

Slow flashing 1 x green

The 3 LEDs of the battery charge-control indicator

flash rapidly when the battery temperature is not with-

in the operating temperature range of –30 to +65°C,

and/or when the overload protection has responded.

Symbols

The following symbols are important for reading and under-

standing the operating instructions. Please take note of the

symbols and their meaning. The correct interpretation of the

symbols will help you to use the machine in a better and safer

manner.

Symbol

Meaning

PSR 14,4 LI-2/PSR 18 LI-2: Cordless

Drill/Driver

Grey-marked area: Handle (insulated

gripping surface)

Article number

Read all safety warnings and all instruc-

tions

English | 9

Capacity

≥ 75%

50—75%

26—50%

≤ 25%

2 609 005 062 | (16.5.11)