- ページ 4
キッチン家電 Andrew James AJ000069のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Andrew James AJ000069 6 ページ。 Apple peeler and slicer
ページを印刷する
Peeling Only
1.
Press the screw regulator (10) and slide the shaft back to its full
extent (8).
2.
Attach the appliance to any flat smooth surface by holding the base
(11) with one hand and pushing the clamp lever (12) with the other
hand. The appliance should then be fully attached to the surface.
3.
Loosen the coring/slicing blade wing nut (3) and disengage the coring/
slicing blade (2) so it is now in a horizontal position.
4.
Push an apple stem end first all the way onto the prongs (1).
5.
Turn the handle clockwise until the apple has completely passed
through the peeling blade (2). The apple should now be peeled.
6.
Carefully remove the apple by holding the base of the appliance with
one hand whilst turning the handle in an anti-clockwise direction.
Slicing and Coring Only
1.
Press the screw regulator (10) and slide the shaft back to its full
extent (8).
2.
Attach the appliance to any flat smooth surface by holding the base
(11) with one hand and pushing the clamp lever (12) with the other
hand. The appliance should then be fully attached to the surface.
3.
Pull the peeling blade armature (4) back and secure it in place with
the catch.
4.
Push an apple stem end first onto the prongs. (1)
5.
Ensure that the Peeling blade armature (4) is standing upright and the
catch is disengaged. Turn the handle until the apple is against the eye
of the coring/slicing blade. (2)
6.
Undo the coring/slicing blade wing nut (3) and align the eye of the
coring/slicing blade with the centre of the apple and then tighten the
coring/slicing blade wing nut.
7.
Hold the apple with one hand and turn the handle anti-clockwise to
release the core from the shaft. The apple is now ready for
consumption.
4