- ページ 5
換気フード Electrolux ECS6691GのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Electrolux ECS6691G 7 ページ。
(Fig.9)
Assemble the flue cover onto the hood body make sure
it on the correct position.
Fig.9
Self-clean
Self-clean instruction
This product is equipped with self-clean technology.
The self-clean icon will start glowing after the motor
works for 15hours. User can tap the self-clean button to
active the self-clean function.
The red indicator will start glowing during the cleaning
process.
The time period for Self-clean is 10 to 15 minutes. The
product can be used during self-clean.
Glass
●Glass should be cleaned every week in order to
keep the shiny
Grease filter
●
The grease filter should be cleaned frequently (
every two months of operation, or more frequently
for heavy use). Use a warm detergent solution.
●
Grease filter is washable
●
Remove the grease filter by unscrewing the screw
on the rotation support and releasing the glass
panel from two hinges . Tilt the filter downward and
remove(Fig.10)
●
Wash the filter , taking care not to bend them.
Allow them to be dried before refitting.
●
To install the grease filter , push filter into position
and release . Fix the glass panel to the two hinges
and refix one screw .
Note: To replace the filter, please let the hood on
suction mode beforecutting off the electrical
supplier and don't open the glass panel by hand.
Fig.10
Replacing the lamp
Dismantle the lower glass by removing the two rubber
columns and unscrewing the two screws on glass(Fig.11).
Replace the damaged LED, only use LED DC 12V,2W Max
Note:
1.To replace the LED, please let the hood on suction mode
before cutting off the electrical supplier and don't open the
glass panel by hand.
2.We recommend only using lamps of the same
specification as the ones being replaced.
WARNING: .
1. Always switch off the electrical supply before carrying
out any operation on the appliance.
2. Only a qualified and trained service technician can
undertake the work of bulbs replacement and servicing.
Fig.11
Changing the lamp