- ページ 5

換気フード Electrolux ECT9281GのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Electrolux ECT9281G 7 ページ。

(Fig.10)

1.Remove the metal grease filter.

2.Reassemble the flue cover onto the hood body and

use supplied screws to fix it on the correct position.

Fig.10

Self-clean

Self-clean instruction

This product is equipped with self-clean technology.

The self-clean function will be automatically triggered

after the motor works for 15hours.

User also can tap the self-clean button to trigger the

self-clean function.

The red indicator will start glowing during the cleaning

process.

The time period for Self-clean is 10 to 15 minutes. The

product can be used during self-clean.

1. Remove the grease filter by unscrewing 2pcs screws.

This will disengage the filter from the hood. Tilt the filter

downward and remove(Fig.11).

2，Wash the filter, taking care not to bend them. Allow

them to be dry before refitting.

3. To install the grease filter, push filter into position

and release. Rescrew two screws .Make sure the filter

is securely engaged after assembly.

Fig.11

(Fig.12)

1.Extract the guard by levering it off with a small screwdriver

or similar tools.

2.Replace the damaged LED, only use. LED DC12V,2W Max.

Fig.12

WARNING:

1. Always switch off the electrical supply before carrying

out any operation on the appliance.

2. Only a qualified and trained service technician can

undertake the work of bulbs replacement and servicing.

NOTE:We recommend only using lamps of the same

specification as the ones being replaced.