- ページ 16

換気フード Electrolux EFA90245XのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Electrolux EFA90245X 21 ページ。 Electrolux cooker hood
Electrolux EFA90245X にも：インストレーション・マニュアル (16 ページ), インストレーション・マニュアル (16 ページ)

Chimney Stack

The chimney consists of two sections.

The lower chimney measures 700mm and the upper

chimney (with the recirculation grilles on either side)

measures 415mm. The overall installed measurement

is min. 830 - max 1100mm.

Fitting the Chimney

• Position the upper chimney section and fix the upper

part to the frame using the 2 screws 12c (2,9 x 6,5)

provided.

• Similarly, position the lower chimney section

fix the lower part to the frame using the 2 screws

12c (2,9 x 6,5) provided.

Fitting the Hood Body

Before fixing the hood canopy to the frame:

• Screw the 2 screws 12f half way into the holes

provided in the sides of the bottom of the

frame.

• Remove the grease filters from the hood

canopy.

• Remove any activated charcoal filters.

• Lift the hood canopy and engage the screws

12f in the slots (A) as far as they will go.

• Working from below, fix the hood canopy to

the frame (B), using the 4 screws 12q and 4

washers 22 provided, then tighten all the screws

securely.

INSTALLING THE COOKER HOOD

��

and

��

�