- ページ 23

換気フード Electrolux EFA90950のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Electrolux EFA90950 28 ページ。 Electrolux cooker hoods brochure
Electrolux EFA90950 にも：特徴 (7 ページ)

ページを印刷する

Ducting Connection

Connect the ducting chosen to:

• the Ø150mm ducting spigot on top

of the motor housing, or the Ø150-

120mm ducting spigot item 9 and

secure using the jubilee clips item

25.

• A Ø120-125mm collar item 9.1 is

provided to ﬁ t over the Ø120mm

ducting spigot when 125mm ducting

is ﬁ tted.

If the room where the cooker hood

is to be used contains a fuel burning

appliance such as a central heating

boiler, then its ﬂ ue must be of the

room sealed or balanced ﬂ ue type.

If other types of ﬂ ue or appliances are

ﬁ tted sure that there is an adequate

supply of air to the room.

The cooker ducting (extraction mode)

must never be connected to central

heating ﬂ ues, radiators or water

heaters etc.

Recirculation

The cooker hood is supplied speciﬁ ed

for use in the recirculation mode, with

the charcoal ﬁ lter ﬁ tted.

In the recirculation mode contaminated

air is passed through the charcoal ﬁ lter

to be puriﬁ ed and recirculated into the

kitchen through the grille outlets on

either side of the chimney.

Recirculation Connection

• Fix the connection item 15 to the

frame using the 4 screws provided.

• Fix the ﬂ ange item 10 to the lower

opening of the connection item 15.

• Connect the hood air outlet to the

ﬂ ange in the lower part of the junction

using a rigid or ﬂ exible ø 150 tube (by

installer's choice).

INSTALLING THE COOKER HOOD

electrolux 23