ページを印刷するThe machine is intended for cleaning of air-driven spray-guns that have been used for painting.
The left side of the unit has two separate areas for cleaning:
1. An automatic washer (items 1A illustration 1), intended for cleaning of spray-guns with gravity fed paint-cups.
In this washer either thinner-based solvents or water-based solvents can be used.
2. A sink (items 2A illustration 1), intended for manual cleaning of other tools used in connection with vehicle
paint-jobs like: spray-guns with suction fed paint-cups, filler scrapers, paint brushes and such.
In this sink either thinner-based solvents or water-based solvents can be used.
The right side of the unit has one area for cleaning:
a. A sink (item 2B illustration 1), intended for manual cleaning of air-driven spray-guns that have been
used for painting with water-based paints, as well as of other tools used in connection with vehicle water-based paint-
jobs like: filler scrapers, paint brushes and such.
In this sink water only shall be used.
All other use of the unit are not allowed like:
Emptying excess paint into the unit
Cleaning of electric chargeable items
Collecting of various waste
Cleaning of textile materials
Storing of items
Cleaning of hands or other parts of the human body
Cleaning of any items for food or drinks
The coagulation process described below (according to recommendations from the paint manufacturer) allows the
cleaning water to be re-used. CHECK CAREFULLY WITH THE APPROPRIATE AUTHORITY TO ENSURE THAT THE
FILTERED WATER OBTAINED AFTER THE COAGULATION PROCESS MAY BE EMPTIED INTO THE REGULAR
DRAIN-WATER SYSTEM. YOU MAY NEED INFORMATION FROM THE PAINT MANUFACTURER WHEN DOING SO
First of all, check if the machine has been damaged during the transport. Remove the packaging and
check again that the machine has not been damaged during the transport. If so, report this immediately to the transport
company.