- ページ 6

ブレンダー Andrew James Deluxe BlenderのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Andrew James Deluxe Blender 13 ページ。

Using the appliance

Before use:

Clean the measuring cap, the lid and the glass jug before using the appliance

for the first time.

Make sure the unit is switched off and do not plug it in before assembling the

appliance.

First fix the blades and the rubber seal onto the jugs base and fit the base

onto the jug.

Fix the jug onto the motor base and make sure it is securely fixed to the base.

Fill the glass jug with the food you wish to blend and make sure the jug does

not overflow with liquid. The maximum capacity of liquid should not exceed

1500 ml.

Never use the unit without putting food into the jug.

Place the lid securely on the glass jar.

Insert the measuring cap in the opening of the lid and turn it counter

clockwise to lock it into position.

How to operate:

Make sure the speed selector is turned to the "OFF" position and then plug

the blender into the mains supply. The blue light around the speed selector

indicates that the appliance is connected to the mains supply.

This unit is equipped with a safety device and the blender does not operate if

the jug is not fixed securely to the motor base.

Place the food you wish to blend into the glass jug.

Place the lid on the glass jug and close it tightly. Insert the measuring cap in

the hole in the lid and carefully turn it counter-clockwise to lock it in

position.

Fix the glass jug onto the motor base. Turn the Speed Selector to the 'ON'

position. The blue light around the speed selector gets brighter indicating

that the blender can now be used as normal.

If you are using the grinder, place the coffee beans in the glass jar. The

quantity of coffee beans must be less than 60% of the total capacity of the

grinding jar. Place the grinder blade assembly and the rubber seal on the

grinder base and firmly fix it to the glass jar. Fix the grinder onto the top of

the motor base. Coffee beans may now be ground as normal.

To use the "SMOOTHIE", "ICE" or "PULSE" functions turn the selector switch

to the "ON" position and press one of the buttons. The button will light up

indicating that the function is operating.