en Environmental protection and saving energy
If you prepare several bags of microwave popcorn in
immediate succession at a microwave power level that
is too high, the cooking compartment may be dam-
aged.
Leave the appliance to cool down for several
▶
minutes between each use.
Never set a microwave power level that is too high.
▶
Use a maximum microwave output of 600 watts.
▶
Always place the popcorn bag on a glass plate.
▶
The microwave feed is damaged by the removal of the
cover.
Never remove the cover of the microwave feed in
▶
the cooking compartment.
3 Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environmentally compat-
ible and can be recycled.
Sort the individual components by type and dispose
▶
of them separately.
3.2 Saving energy
If you follow these instructions, your appliance will use
less power.
Open the appliance door as little as possible during
operation.
¡ This will maintain the temperature in the cooking
compartment and eliminate the need for the appli-
ance to reheat.
4 Installation and connection
4.1 Safety clearances
Comply with the safety clearances for the appliance.
4.2 Installing and connecting the appliance
WARNING ‒ Risk of electric shock!
Incorrect installation is dangerous.
Connect and operate the appliance only in accord-
▶
ance with the specifications on the rating plate.
6
Removing the transparent film from the inside of the
door damages the appliance door.
Never remove the transparent film on the inside of
▶
the door.
Liquid that penetrates the interior of the appliance may
damage the turntable drive.
Monitor the cooking process.
▶
Set a shorter cooking time first and, if necessary, in-
▶
crease the cooking time.
Never use the appliance without the turntable.
▶
Using unsuitable cookware may result in damage.
When using the grill, the microwave combi mode or
▶
the hot air, only use tableware that can withstand
the high temperatures.
Hide the clock in standby mode.
¡ The appliance saves energy in standby mode.
Note:
The appliance requires:
¡ A maximum of 1 W when the appliance is in opera-
tion with the display switched on
¡ A maximum of 0.5 W when the appliance is in oper-
ation with the display switched off
Connect the appliance to a power supply with al-
▶
ternating current only via a properly installed socket
with earthing.
The protective conductor system of the domestic
▶
electrical installation must be properly installed.
Never equip the appliance with an external switch-
▶
ing device, e.g. a timer or remote control.
When installing the appliance, check that the power
▶
cable is not trapped or damaged.
If the insulation of the power cord is damaged, this is
dangerous.
Never let the power cord come into contact with hot
▶
appliance parts or heat sources.
Never let the power cord come into contact with
▶
sharp points or edges.
Never kink, crush or modify the power cord.
▶
WARNING ‒ Risk of burns!
The rear of the appliance becomes very hot during op-
eration.
Place the appliance with the back panel against a
▶
wall.
Keep children at a safe distance.
▶
Place the appliance on a level, solid surface with
1.
sufficient load-bearing capacity.