- ページ 4

ラック＆スタンド Atlantic 63607145のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Atlantic 63607145 6 ページ。 Tilting wall mount fits 37" to 84" flat panel tvs

This mount is designed to be attached into wood

studs. DO NOT use wall anchors. Using a stud

a pencil mark the hole locations at the desired

height, making sure you are level. Use the wall

plate (A) as a template to mark the two remaining

hole locations. Drill pilot holes at four pencil marks

2.5 in. (64 mm) deep, using a 7/32 in. or 5.5 mm

diameter drill bit.

Attach wall plate (A) to wall with four washers and

screws (E).

Turn two handles (F) into the mounts through

washers (G) but do tighten. After wall mounting

your TV, adjust TV to the desired viewing angle

and turn to tighten both handles.

Attach TV mounts (B and C) to the TV back panel.

Make sure to select the same height screw holes,

so the mounts are centered and level.

Refer to the next page to select the correct

mounting hardware for your TV.

We strongly recommend two people, one on

each side, hold the TV. Tilt the top of the TV

toward the wall. Carefully position TV mounts

(B and C) over the wall plate until both lock in

place. Tighten safety screws.

safety screws