ページを印刷するNote: Do not insert the Urosensor
your child wanders out of range of the alarm before bed and has a small wetting
event the Urosensor
Urosensor
is not washed and dried properly after such an event it will not be
™
able to trigger the alarm if your child wets the bed during the night. Only put the
Urosensor
in your child's undergarments once they go to bed.
™
The alarm triggers and my child has not wet the bed.
Occasionally the Urosensor
this is due to sweat. To prevent this:
1. Bury the Urosensor
2. Turn the Urosensor
the crotch.
My child sleeps through the alarm.
At the beginning of the treatment a very heavy sleeper may not wake to the
sound of the alarm. This does not mean that the DRI Sleeper
not work for your child. In time even heavy sleepers will wake to the alarm.
It is recommended that you undertake the priming programme described in the
section entitled 'Priming': preparing your child to use the alarm. Also, follow
these steps with a heavy sleeper:
1. Wake your child when the alarm sounds.
2. Ask him or her to switch off the alarm and go to the bathroom.
3. Have your child remove the Urosensor
it in clean dry underwear for re-use.
4. Take your child back to bed and ask them to switch the alarm back on.
Make sure your child is completely awake and the next day remembers hearing
the alarm and going to the bathroom.
The alarm does not beep when I turn it on.
If the alarm does not beep the battery may need replacing. Follow these steps:
1. Insert a coin between the protruding plastic ridges at one end of the alarm
base (see diagram in the section entitled DRI Sleeper
twist it so the cover comes off the battery case.
2. Pull the battery drawer out to reveal the battery.
3. Remove the battery and replace with a fresh CR2354 coin battery.
in you child's underwear before bed. If
™
will not be able to trigger the alarm. Furthermore, if the
™
may trigger when no urine has been passed and
™
more deeply in the absorptive layers of the minipad; or,
™
over so the black sensing strips are facing away from
™
, rinse it in water, dry it and re-insert
™
– 8 –
eclipse alarm will
®
eclipse Alarm) and
®