- ページ 9

ドライヤー Dri-Air Industries HP4-X 750 SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dri-Air Industries HP4-X 750 Series 17 ページ。 Floor mount dryer

START-UP PROCEDURE

OPERATING MANUAL - HP4-X 400-750 FM DRYERS

Revision 10/8/02

DRI-AIR

INDUSTRIES, INC.

Turn disconnect on electrical panel to ON position and follow

the instructions below:

Microprocessor Control Panel

1. Power light indicates there is power on.

2. After initializing, dri air will be displayed.

3. Press START to start the dryer.

4. To set the process air temperature:

Press SET - right display shows set temp.

Change setting using arrow keys.

Press ENTER to input new setting.

5. Left display indicates actual temperature

6. Right display shows dewpoint or set temp

Press TEMP to display process air set temp.

Press D.POINT to display dew point.

7. To set high temp alarm: (degrees over setting)

Press ALARM - right display shows setting.

Change setting using arrow keys.

Press ENTER to input new setting.

8. Status block indicates heater on or fault

9. See Microprocessor manual for setting 7-day timer .

10. Configuration of the dryer parameters is done

using the setup button. See Microprocessor Control

manual.

These instructions are covered in detail in Microprocessor

Control Instruction Manual. Please read this manual before

proceeding further.

Page 9