- ページ 7

サブウーファー Atlantic Technology 222 PBMのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Atlantic Technology 222 PBM 16 ページ。 High performance subwoofer systems

Models 222 PBM, 262 PBM and 352 PBM THX

Connection

Atlantic Technology Powered Subwoofers are simple to hook up, offering several

connection methods for maximum flexibility. Study the system diagrams starting on

page 8. Once you have found the example which most closely matches your system,

hook up your subwoofer(s) as shown in that diagram.

For best performance, we suggest using the low-level (RCA style jacks) subwoofer line

out or preamp outputs if your receiver/amplifier has them. Simply connect your

subwoofer with high quality shielded cables as shown in the diagrams.

Alternately, you may use the high-level (speaker) inputs. Make sure to match the type

and gauge speaker wire used to connect your main speakers.

We recommend that you connect your subwoofer using high quality wire of 16 gauge

or larger for lengths up to 25 feet. There are many manufacturers who specialize in

speaker wire and interconnects suitable for your new system. We recommend that you

consult your local audio/video specialist for more specific information.

Warning: To prevent risk of electrical shock or damage to your equipment, always unplug all

component AC cords before proceeding with speaker and component connections.

You can connect your subwoofer by using spade lugs or "banana" connectors, or by

removing 1/2" of insulation from each wire end, twisting the strands of wire together,

placing the wire through one of the post holes and screwing down the nut tightly. Be

Figure 3:

Speaker Wiring

Terminals

either a different color, printing, ridges, or a thread intertwined with the wire strands.

By convention, the marked wire is connected to the red (+) terminal.

certain that no stray wire strands are touching across

the two terminals as this might damage your amplifier

when you turn it on.

It is important to observe polarity while making speaker

connections: red (+) terminals on the amplifier to red

(+) on the speaker, black (-) on the amplifier to black (-)

on the speaker. Look carefully at the wires you are using

and note that one of the wires in each pair is marked by

tlantic

TECHNOLOGY