- ページ 4
サブウーファー Atlantic Technology 642e SBのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Atlantic Technology 642e SB 12 ページ。 Sb-series box subwoofers
Atlantic Technology 642e SB にも： 製品情報シート (2 ページ)
ページを印刷する
4
Subwoofer Rear Panel
Subwoofer Rear Panel
Figure 1
1
2
3
4
5
LowPass Switch
1
When in the NORMAL position, adjustment of the crossover can
be made by the LowPass Control. If being fed a pre-filtered or THX
signal, place the switch at the BYPASS position. (pages 5 and 9)
Standby Switch
2
When in ON position, the amplifier will always be on. When in the
OFF position, the amplifier will be off. When in the AUTO position,
the amplifier will be in Automatic Standby Mode. (pages 5 and 9)
Phase Switch
3
This switch allows precise acoustic matching with satellite speaker
systems whose output may be phase reversed. (pages 5 and 10)
LowPass Control
4
An adjustable (40Hz to 140Hz) @ 18dB per octave low-pass cross-
over. (pages 5 and 9)
Product Serial Number
5
Write this number in the space provided on page 2 for future
reference.
LOWPASS
STANDBY
PHASE
NORMAL
OFF
NORMAL
BYPASS
ON
INVERT
AUTO
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
DOUBLE INSULATION - WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS
CONFORMS TO
UL STD.6500
CERTIFIED TO
CAN/CSA STD.E60065
DESIGNED BY ATLANTIC TECHNOLOGY IN USA,
LOWPASS
INPUT
OUTPUT
60
80
40
140
ON
50-60Hz 300W MAX
FOR 110-120VAC, USE 3A L 250V FUSE
2001310
FOR 220-240VAC, USE 2A T 250V FUSE
110-120V
Low Level Input
6
Use the input to connect to the subwoofer or LFE line out from
your processor/receiver. (pages 5 and 6)
Low Level Output
7
The outputs allow daisy chaining of multiple subwoofers, or as a
return path back to the processor. (pages 5 and 6)
On/Off Switch
8
Use this switch to turn the amplifier completely on or off.
AC Input
9
Use the included power cord to connect your amplifier to a wall
outlet. (pages 5 and 6)
110/0V Switch
10
Voltage switch for use in different countries. This switch will be set
when you receive the unit. Change this setting only when you are
sure your application requires it. For US, the switch should be set
to the 110-120V position.
Model 642e SB Powered Subwoofer
R
L/MONO
OFF
AC INPUT
220-240V
6
7
8
9
10