ページを印刷するControls
Fig. "
1
On/Off button
Serves to switch the whole
appliance on and off.
2
"Super" button refrigerator
compartment
Switches super cooling on and
off.
3
Temperature selection button
The required temperature is set
with this button.
4
Refrigerator compartment
display
Indicates the current temperature
setting in the refrigerator
compartment.
5
Alarm button
Used to switch off the warning
signal, see chapter "Alarm
function".
Switching the
appliance on
Fig. "
Switch on the appliance with the On/Off
button 1.
The temperature display 4 indicates the
set temperature.
The appliance begins to cool. Light is
switched on when the door is open.
We recommend a factory setting of +4
°C in the refrigerator compartment.
Do not store perishable food warmer
than +4 °C.
Operating tips
After the appliance has been switched
■
on, it may take several hours until
the set temperatures have been
reached.
Do not put any food in the appliance
beforehand.
If the air humidity is high,
■
condensation may form in the
refrigerator compartment, especially
on the glass shelves. If this is the
case, pack or wrap the food and
select a lower temperature in the
refrigerator compartment.
Setting
the temperature
Fig. "
Refrigerator compartment
The temperature can be set from +3 °C
to +8 °C.
Keep pressing temperature setting
button 3 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 4.
Cool-fresh compartment
The temperature in the "cool-fresh"
compartment has been set to almost
0 °C at the factory and should not be
changed if at all possible.
If frost forms on the refrigerated food,
the temperature can be increased. (See
chapter "Eliminating minor faults
yourself".)
en
9