- ページ 13

換気フード Electrolux Premier EPHOODのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Electrolux Premier EPHOOD 21 ページ。 Cooker hood
Electrolux Premier EPHOOD にも：取扱説明書 (20 ページ)

ページを印刷する

Unpacking

The fittings supplied to install this cooker

hood can be found with the instruction book

inside the packaging and consists of the

following:

Ducting spigot

Blanking plate

Wall Fitting

The cooker hood is fitted to the wall using the

keyhole slots in the back of the hood.

Mark the position on the wall for the two

Ø 8mm dia screw holes (A) as illustrated in the

drawing opposite at 568mm.

Check that the hole distances are correct and

are level using a spirit level.

At this stage it is important to allow 25mm (1")

clear space above the cooker hood to enable it

to be hooked onto the screws and for

subsequent removal for decorating or

servicing.

Insert the screws and tighten to a distance of

5mm.

Venting

The hood is more effective when used in the

extraction setting (ducted to the outside).

Venting kits may be purchased through your

retailer or DIY store, and must be ducted to

an outside vent of 100mm (4") minimum.

The ducting used must be manufactured from

fire retardant material which should conform to

the relevant British Standard or DIN4102-B1.

When the hood is ducted externally the

charcoal filter must be removed and the

slider control must be in the ducting position.