- ページ 13

換気フード Electrolux RH36WC60GSAのPDF 設置、お手入れ、使用説明書をオンラインで閲覧またはダウンロードできます。Electrolux RH36WC60GSA 21 ページ。 30" and 36" free standing range hood
Electrolux RH36WC60GSA にも：工場部品カタログ (4 ページ), 工場部品カタログ (4 ページ), パーツカタログ (4 ページ)

ページを印刷する

installing the hood

Making the electrical

connections

Electrical Shock Hazard

Warning: Turn off power at the service panel before

wiring this unit.

120 VAC, 15 or 20 Amp circuit required.

ELECTRICAL GROUNDING INSTRUCTIONS

THIS APPLIANCE IS Flqq-EDWITH AN ELECTRICAL

JUNCTION BOX WITH 3 WIRES, ONE OF WHICH

(GREEN/YELLOW) SERVES TO GROUND THE

APPLIANCE. TO PROTECTYOU AGAINST

ELECTRIC SHOCK, THE GREEN AND YELLOW

WIRE MUST BE CONNECTED TO THE

GROUNDING WIRE IN YOUR

HOME ELECTRICAL SYSTEM, AND IT MUST

UNDER NO CIRCUMSTANCES BE CUT OR REMO-

VED.

Failure to do so can result in death or electrical

shock.

•

Remove junction box cover and knockout on the

top left side.

Junction box

cover

If not already done, install 1/2" conduit connector

in j-box.

House

wiring

U.L listed

wire

electrical

conduit

Run black (live), white (neutral), and green (earth)

wires (#14 AWG) according to the National

Electrical Code or CSA Standards and local

codes and ordinances in 1/2" conduit from power

supply to j-box.

Connect black, white, and green wires from

power supply to black, white, and green/yellow

wires in j-box respectively.

These connections should be done always

making reference to the electrical diagram found

inside the hood.

Close j-box cover and reapply screws.

Mounting

the glass canopy

= With the hood mounted on the wall slide the glass

canopy over the glass supports.

Insert the glass brackets.

Insert two screws into the bracket holes, drive the

screws by hand.