- ページ 3

ページを印刷する

1. Putting into Operation

BTEXACT_bu_3609929A44_t.fm Seite 2 Montag, 5. September 2005 2:12 14

Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

Use the power tool, accessories and tool bits

etc., in accordance with these instructions and

in the manner intended for the particular type of

power tool, taking into account the working

conditions and the work to be performed. Use

of the power tool for operations different from those

intended could result in a hazardous situation.

Battery tool use and care

Ensure the switch is in the off position before in-

serting battery pack. Inserting the battery pack

into power tools that have the switch on invites acci-

dents.

Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one

type of battery pack may create a risk of fire when

used with another battery pack.

Secure the work piece. A work piece clamped

with clamping devices or in a vice is held more se-

curely than by hand.

Before all work on the machine itself (e.g.,

maintenance, tool replacement, etc.) as well as

when it is being transported or stored, place the

direction of rotation switch in the middle posi-

tion. For unintentional actuating of the on/off switch,

the danger of injury exists.

Do not open the battery. The danger of a short cir-

cuit exists.

3 609 929 A44 • (05.09) T

Use power tools only with specifically designat-

ed battery packs. Use of any other battery packs

may create a risk of injury and fire.

When battery pack is not in use, keep it away

from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects, that can make a connection from one

terminal to another. Shorting the battery terminals

together may cause burns or a fire.

Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact acci-

dentally occurs, flush with water. If liquid con-

tacts eyes, additionally seek medical help. Liq-

uid ejected from the battery may cause irritation or

burns.

Service

Have your power tool serviced by a qualified re-

pair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

2 SPECIFIC SAFETY RULES

FOR CORDLESS SCREWDRIVERS

Protect the battery from heat, for example, also

the continuous exposure to sun radiation and

fire. The danger of explosion exists.

Do not short-circuit the battery. The danger of

explosion exists.

Hold the power tool very firmly. When screws are

tightened and loosened, high resulting torques can

occur.

English–2