Area
Cleaning agents
Stainless steel
Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth.
Clean stainless steel surfaces in the direction
of the grain only.
Special stainless steel cleaning products are
available from our after-sales service or from
specialist retailers. Apply a very thin layer of
the cleaning product with a soft cloth.
Painted surfaces
Hot soapy water:
Clean using a damp dish cloth and dry with a
soft cloth/towel.
Do not use any stainless steel cleaners.
Aluminium and plastic Glass cleaner:
Clean with a soft cloth.
Glass
Glass cleaner:
Clean with a soft cloth. Do not use a glass
scraper.
Operating controls
Hot soapy water:
Clean using a damp dish cloth and dry with a
soft cloth.
Risk of damage to the electronics from pene-
trating moisture. Never clean operator con-
trols with a wet cloth.
Do not use any stainless steel cleaners.
Cleaning the metal mesh grease filters
These instructions apply to several appliance variants. It
is possible that individual features are described which
do not apply to your appliance.
:
Warning
Risk of fire!
Grease deposits in the grease filter may catch fire.
Clean the grease filter at least every 2 months.
Never operate the appliance without the grease filter.
Notes
Do not use any aggressive, acidic or alkaline
■
cleaning agents.
When cleaning the metal mesh grease filters, also
■
clean the holder for the metal mesh grease filters in
the appliance using a damp cloth.
The metal mesh grease filters can be cleaned in the
■
dishwasher or by hand.
By hand:
You can use a special grease solvent for
Note:
stubborn dirt. It can be ordered via the Online Shop.
Soak the metal mesh grease filters in a hot soapy
■
solution.
Clean the filters with a brush and then rinse them
■
thoroughly.
Leave the metal mesh grease filters to drain.
■
In the dishwasher:
If the metal mesh grease filters are cleaned in the
Note:
dishwasher, slight discolouration may occur. This has
no effect on the function of the metal mesh grease
filters.
Do not clean heavily soiled metal mesh grease filters
■
together with utensils.
Place the metal mesh grease filters loosely in the
■
dishwasher. The metal mesh grease filters must not
be wedged in.
Removing metal grease filter
Open the lock and fold down the metal grease filter.
1.
While doing this, place your other hand under the
metal grease filter.
Take the metal grease filter out of the holder.
2.
Notes
– Grease may accumulate in the bottom of the
metal grease filter.
– Hold the metal grease filter level to prevent
grease from dripping out.
Clean the metal grease filter.
3.
Installing the metal mesh grease filter
Insert the metal mesh grease filter.
1.
While doing this, place the other hand under the
metal mesh grease filter.
Fold the metal mesh grease filter upwards, locking it
2.
in place.
Cleaning and maintenance en
9
ページを印刷する