- 1. Important Safety Instructions
- 2. Features
- 3. Vacuum Cleaner
- 4. Wand and Hose Assembly
- 5. Overheating Protection
- 6. Information Panel
- 7. Use of Standard Attachments
- 8. Operation
- 9. Using the Power Nozzle
- 10. Maintenance
- 11. To Replace Air Filters
- 12. To Clear Clogged Hose
- 13. Limited 5 Year Warranty
Maintenance
Follow the steps listed below in order to ensure peak cleaning performance.
•
Vacuum brushes with end of hose handle after use.
•
Wipe tools occasionally with damp cloth or sponge and mild detergent.
•
Change bags and/or filters regularly. The air filter should be replaced after each use of six filter bags.
•
Periodically check revolving brushes for build-up of lint, hair, or other foreign material and remove as necessary.
•
Store cleaner in dry area; never outdoors.
•
Have cleaner checked periodically by an authorized Aerus™ service center.
To replace air filters
•
Slide accessories off of accessory clip.
•
Gently press filter cover latch and lift off the exhaust air diffuser (Fig. V).
Lift air filter out and replace with a new one (Fig. W).
•
•
Engage the two tabs on the front of the exhaust air diffuser in the matching openings on the canister and snap
into place.
To clear clogged hose
•
Slide accessories off of accessory clip.
Gently press filter cover release and lift off the exhaust air diffuser (Fig. V).
•
Lift air filter out (Fig. W).
•
•
Attach machine end of hose into blower outlet hose receptacle.
Place handle end of hose into a container. Turn the cleaner on and blow object into container (Fig. X).
•
•
Once hose is clear, press the release on blower outlet hose receptacle and pull hose out.
Reinstall air filter, engage the two tabs on the exhaust air diffuser (Fig. V) in the matching openings on the
•
canister and snap into place.
8
Fig. V
Fig. W
Fig. X