- ページ 7

掃除機 Electrolux 5805のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Electrolux 5805 10 ページ。 Electrolux cyclone power bagless home cleaning system

ページを印刷する

Emptying the dust compartment

Empty the dust compartment after each vacuum

cleaning or as necessary. For best results it is

recommended that the dust compartment is emptied

regularly.

• Press the locking catch and remove the dust

compartment.

• Remove the filter holder from the dust

compartment by pressing the green catch with your

thumb.

• Empty the dust compartment. Tip - to prevent dust

escaping, hold a plastic bag securely around the dust

compartment and empty contents into bag. Wait 30

seconds for dust to settle before removing and

sealing bag. Clean and dry the the compartment if

required.

• Remove any particles from the Cyclone cone and

replace filter holder ensuring it is properly inserted

and fastened.

• Replace the dust compartment (reposition front

first as shown in the diagram) until the locking catch

clicks to engage. Do not try to force shut.

Cleaning the filters

There are two lifetime filters in your Cyclone Power.

Should you ever need to replace them, use only

original Electrolux filters.

Filter 1 / Cyclone Filter ref.EF102

Filter 2 / Washable, reusable HEPA Filter

ref.EF25a

Cleaning of filter 1 when the filter

illuminates.

• Remove and empty the dust compartment as

detailed above.

• Remove the filter cassette from the filter holder.

• Pull the orange tag to remove the sponge filter from

cassette.

• Remove loose fibres and larger particles from the

filter.

• Hand wash the filter or place in washing machine

on a 40˚ C programme. Squeeze to remove excess

water and leave to air dry. The filter must not be

tumble-dried. Place the filter back into the filter

cassette and filter holder ensuring it is completely

dry. Replace the filter holder back into the Cleaner.

• To avoid damaging the cleaner, do not use it

without the filters in place. A safety device (orange

button) prevents the insertion of the dust compart-

ment if Filter 1 is not in place (Do not try to force

shut). If the light is still on, check for possible

blockages in the nozzle, tube or hose.

For healthier homes

indicator

Cleaning of Filter 2 / HEPA Filter, when the filter

indicator illuminates.

• Open the filter cover and remove the filter.

• Rinse the inside (dirty side) of the filter under warm

tap water. Do not use cleaning agents and avoid

touching the delicate filter surface.

• Tap the filter frame to remove excess water. Repeat

the cleaning procedure at least four times and allow

the filter to air dry completely. The original filtering

performance is now restored. Place the dry filter

back into the cleaner and close the cover.

Troubleshooting

Power: If the cleaner does not start, disconnect from

mains, check plug, cable and fuses where

appropriate.

Blocked air flow and dirty filters: The cleaner

stops automatically if a blockage occurs in the

nozzle/tube/hose or if the filters or Cyclone cone are

blocked with dirt. Disconnect from mains and allow

the cleaner to cool for 20-30 minutes. Remove

blockage and/or clean the filters. Restart the cleaner.

The clearing of blocked hoses is not covered by the

guarantee. To avoid blockages and maintain suction

efficiency, the floor nozzles should be cleaned

regularly using the hose handle.

Water: If water is sucked into the cleaner the motor

must be changed at an Electrolux Service Centre.

This is not covered by the guarantee.

Electrolux decline all responsibility for all damages

arising from any improper use of the appliance or in

cases of tampering with the appliance.

Electrolux reserve the right to alter product

appearance and/or specifications without notice. Not

all models featured are available in all countries.

Electrolux vacuum cleaner features and accessories

are protected worldwide by Patents or Registered

For healthier homes

designs.

ANY PROBLEMS?

Don't understand the instructions?

DON'T TAKE

IT BACK TO THE SHOP

We are only a telephone call away.

CUSTOMER HELPLINE

08706 055 055

Local call cost Australia wide: 1300 369 333

Something missing?

Need more help?