- ページ 8

掃除機 Electrolux EL4012AのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Electrolux EL4012A 20 ページ。

USING THE CANISTER VACUUM CLEANER FOR THE FIRST TIME

ENGLISH

How to assemble

1. Press "Open" bar and raise cover.

2. Check to confirm that HEPA

s-filter (A) is in place.

3. Check to confirm that dust bag (B)

and motor filter (C) are in place.

4. Close cover. Press tabs on each

side of hose end (D) and rotate

until it snaps into place.

(To remove hose, press tabs on

each side and pull to release.)

5. Insert hose end (E) into hose

handle until it clicks into place.

(To remove hose handle, press

tabs and pull to release.)

6. Push hose handle into wand until

it clicks. (Press tab and pull to

release.)

7. To extend wand, push lever up

and pull.

8. Press tool caddy to clamp onto

upper section of wand; store

3-in-1 tool in caddy.

9. Push desired floor nozzle onto

wand until it clicks. (Press tab and

pull to release.)

1. Pull out power cord and plug in.

2. Press on/off switch to start. Turn

dial on top of canister to select

desired suction power.

3. Use slide on hose handle to

further adjust suction power.

4. To retract cord, press rewind

switch. Hold the plug to prevent it

from hitting you.

www.electrolux.com

Click