- ページ 9

無線アクセスポイント Atlantis Land A02-AP-W54_GE01のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Atlantis Land A02-AP-W54_GE01 12 ページ。 Atlantis land wireless multi-function access point quick start guide

ページを印刷する

1.7.1 IP Adress

This section describes the configuration required by LAN-

attached PCs that communicate with the Wireless Multi-

Function Access Point, either to configure the device or for

network access. These PCs must have an Ethernet

interface (or wireless adapter) installed properly, be

connected to the Wireless Multi-Function Access Point

either directly or through an external repeater hub or by

wireless, and have TCP/IP installed and configured to

obtain an IP address through a DHCP server or a fixed IP

address that must be in the same subnet of the Wireless

Multi-Function Access Point. The default IP address of the

Wireless Multi-Function Access Point is 192.168.1.100 and

subnet mask is 255.255.255.0.

Please follow the steps below for PC's network environment

installation. First of all, please check your PC's network

components. The TCP/IP protocol stack and Ethernet

network adapter must be installed. If not, please refer to MS

Windows related manuals.

1.8 Default Settings

Before configurating this Wireless Multi-Function Access

Point, you need to know the following default settings.

User:

Password:

IP address (192.168.1.100)

Subnet Mask(255.255.255.0)

Wireless: Access Point

SSSID: default

Channel:6

Wireless Multi-Function Access Point