- ページ 2

スピーカー Atlas FC104-T70のPDF 仕様をオンラインで閲覧またはダウンロードできます。Atlas FC104-T70 2 ページ。 Fc104 series 4" high-compliance loudspeaker with transformer

Architect & Engineer Specifications

Unit shall be Atlas Sound 4" diameter loudspeaker Model FC104 or

loudspeaker / transformer Model ______. Loudspeaker shall be listed

by Underwriters Laboratories (UL 1480 General Signaling) to U.S. and

Canadian safety standards. The cone shall be the damped, high-compli-

ance type. Base unit (without transformer) shall have a smooth extended

fre quen cy re sponse over a range of 150 Hz – 17 kHz and a power rating

of not less than 10 watts program. The dispersion angle shall be 135° (-6

dB, 2 kHz octave band). The magnet shall be a 10 oz. (283g) ceramic type

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

FC104 Beamwidth (-6dB)

FC104 Frequency Response

FC104 Impedance (Ohms) vs. Frequency

FC104 Polars (Normalized to Zero on Axis) (-6dB)

providing the 1" (25 mm) voice coil to operate in a magnetic field

of at least 10,500 gauss. Voice coil impedance shall be 8 ohms.

Sensitivity shall be 94 dB (measured at 1 W / 1 M input). Free-air

resonance shall be 101 Hz. Trans form er primary volt age shall be ____

(25V, 70.7V, 100V) with a fre q uen c y re s ponse range of __________ and

power taps at ______ watts. Insertion loss shall not exceed ___dB. The

maximum depth of the loud speak er (Not including transformer) shall not

exceed 2

⁄

" (57 mm). Unit shall be used in conjunction with Atlas Sound

baffle Model __________ and Enclosure Model __________.

AtlasSound.com

2/2