- ページ 2
スピーカー Atlas GSS-GのPDF 取扱説明書および設置マニュアルをオンラインで閲覧またはダウンロードできます。Atlas GSS-G 2 ページ。 Garden speaker
ページを印刷する
To Install Head Unit on Base:
1. R emove temporary cover, if present. Retain screws.
2. A ttach the purple wire from the head unit to the positive input wire
and the black to the negative.
3. L ine up the 3 "feet" on the head unit with the holes in the base.
4. P ush the head unit down into the holes and turn clockwise to lock the
head unit in place.
5. P ut a 1" Phillips-head screw (supplied with the base) through
the locking screw access hole to secure and prevent removal by
unauthorized persons.
6. P ut stick-on logo cover over access hole. (See Figure 1)
7 . S elect transformer tap wattage or 8Ω input position using a dime or
small screwdriver to adjust stepped switch. (Switch is located on the
underside of the "domed" section of the head unit near outer edge.)
Insert red weather protection "plug" into recessed switch cavity
using thumb to press the cap into place. (See Figure 2)
Garden Speaker Specifications
Frequency Response
43Hz – 20kHz (±7dB)
Sensitivity (1W / 1M)
89.5dB (Half Space Reference)
Power Handling
70 Watts RMS
Horizontal Dispersion
360°
Speaker
C oaxial 8", Polypropylene / Kevlar Cone with
Rubber Surround,
⁄
" Mylar Dome Tweeter,
1
2
1
⁄
" Voice Coil, 21oz Magnet
1
2
Transformer
8, 16, & 32 Watts, with an External Switch for
Tap Selection and for Bypassing Transformer
Dimensions
T all Base Width
17
⁄
" (448mm)
5
8
Tall Base Length
17
⁄
" (448mm)
5
8
Tall Base Height
20
⁄
" (531mm)
7
8
Short Base Diameter
15
⁄
" (384mm)
1
8
Short Base Height
13
⁄
" (334mm)
1
8
Head Unit Weight
1 3.2 lbs (5.99Kg)
Short Base Weight
2.4 lbs (1.09Kg)
Tall Base Weight
6.4 lbs (2.9Kg)
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
GSS-G & GST-G
Garden Speaker
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
2/2
Speaker
Head Unit
Figure 1
Figure 2
AtlasSound.com