- ページ 2

スピーカー Atlas SM42T-WのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Atlas SM42T-W 13 ページ。 Surface mount loudspeakers
Atlas SM42T-W にも：仕様 (2 ページ), 仕様 (2 ページ), オーナーズマニュアル (15 ページ), オーナーズマニュアル (13 ページ)

ページを印刷する

1. Installation

Surface Mount Loudspeakers

Thank you for choosing Atlas Sound Strategy Series

Atlas Sound manufactures the largest selection of commercial and professional sound products in the industry.

For information on our other products, go to www.AtlasSound.com or call 800.876.3333.

General Description

All Atlas Sound Strategy Series speaker systems are designed to provide high fidelity, long life and installation convenience for com-

mercial and residential applications. Because of their weather-resistant properties they are perfect for use indoors or out. The Atlas

Sound Strategy Series surface mount speakers are available in 4", 5

black or white.

Features

• Includes internal, high efficiency 70.7V / 100V transformer (may be bypassed for 8Ω operation)

• Barrier strip input with weather resistant cover

• Bracket included for wall mounting

• Also compatible with optional mounting systems from Atlas Sound and others:

• SM82T - Omnimount

• Model 30.0WB is recommended for wall mounting

• Other mounting systems must match 4

• Mounting system must be rated to support at least 20 lbs (9Kg)

• SM42T, SM52T - Atlas Sound SMBALLMOUNT (indoor use only) or Omnimount

• Other mounting systems (single shaft or dual hole mount) may be used to match

mounting systems must match 2

• Mounting system must be rated to support at least 10 lbs (4.5Kg)

Placement

Outdoor Use

The materials used in the construction of the Strategy Series surface mount speaker systems are weather resistant. The hardware is

brass, the grille is powder-coated aluminum, and the bracket is zinc plated, powder coated steel. The enclosure itself is shatter resis-

tant. Adhering to these mounting guidelines will further extend the life of the product when installed outdoors:

• Whenever possible, mount the speaker under an eave or other protective overhang.

• Always aim the speaker at a slight downward angle to prevent water from accumulating on the speaker cone.

• Do not place the speaker in a location where water, snow or ice will accumulate on the speaker for extended periods of time.

Indoor Use

The Atlas Sound Strategy Series surface mount speaker system works very well when it is wall-mounted in indoor applications. When

you place the speaker on a wall, you take advantage of the natural boundary effect that occurs when a speaker system is placed

against one or more surfaces. This boundary effect will provide increased overall output. When you mount the speaker against one

surface (on a wall), output will increase by 3dB. When you mount the speaker against two surfaces (on the wall near the ceiling or

corner), you increase the output by 6dB. When you mount the speaker against three surfaces (in a corner near the ceiling), output will

increase by 9dB.

Shelf Mounting

The bottom surface of the SM42T, SM52T, and SM82T are a flat 90° to the speaker baffle to maintain level surface when placing on

shelves. All models can also be horizontally installed in any placement option.

AtlasSound.com

30.0 series

™

⁄

" (108mm) x 2" (51mm) ,

⁄

" (60mm) OC,

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

Specifications are subject to change without notice.

Surface Mount Loudspeakers

⁄

", and 8" woofer sizes for 70.7V / 100V / 8Ω systems, finished in

⁄

"-20 insert spacing on bottom of speaker.

10.0 series

™

⁄

"-20 insert spacing.

– 2 –

Owner's Manual

⁄

"-20 insert(s) on rear of speaker. Dual hole