- ページ 6

スピーカー Atlas SMA-12のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Atlas SMA-12 12 ページ。 Sma and smp series 12" & 15" speakers

ページを印刷する

SMA Speaker Rear Panel

1. AC Inlet

2. On/Off Switch

3. Amp Out

4. LED Indicators

5. Mic IN XLR

6. Mic Gain

7. Mic Low

8. Mic Mid

9. Mic High

10. Line IN XLR

11. Line Out XLR

12. Line Gain

13. Line IN Low

14. Line IN High

15. Line IN RCA

AtlasSound.com

SMA/SMP

12" & 15" Speakers

Connect the included power cord here. Note: power cord should only be connected to 120V

power outlets.

This switch will turn the power to the integrated amplifier On or Off. When the power switch

is in the On position, the LED labeled "Pow" will illuminate Blue.

This Speak-ON

connector is designed to connect the SMA speaker to a passive SMP model

to share signal. Turn Speak-ON

The unit features three LED indicators: Pow indicates the unit has power and will illuminate

BLUE when the power switch is on, Pro indicates the unit is in protect mode and will

illuminate RED (if the Pro LED is illuminated reduce the gain), and Sig indicates that signal is

present and will illuminate GREEN.

This balanced XLR connection is designed to provide signal from a microphone connected

directly to the unit.

Adjusts the gain level of the Mic In signal referencing the output voltage of the mic.

Adjust the low frequency band of the Mic In between -10dB and +10dB.

Adjust the mid frequency band of the Mic In between -10dB and +10dB.

Adjust the high frequency band of the Mic In between -10dB and +10dB.

This balanced XLR connection is designed to provide signal from a source like preamplifier

or mixer with an XLR output.

This balanced XLR connection allows the user to connect one SMA speaker to another SMA

speaker in order to share the signal in applications that require the output of two powered

models.

Adjusts the gain level of the Line In signal referencing the output voltage of the source.

Adjust the low frequency band of the Line In between -10dB and +10dB.

Adjust the high frequency band of the Mic In between -10dB and +10dB.

This unbalanced RCA connection allows for connection to external audio sources like CD

players, satellite radio receivers, computers, smartphones, etc.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Specifications are subject to change without notice.

connector counterclockwise to unlock and clockwise to lock.

Telephone: 800.876.3333 • Fax: 800.765.3435

– 6 –

Owner's Manual