- ページ 7

アンプ Atlas PA601のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Atlas PA601 16 ページ。 Atlas sound infrared repeater system & devices
Atlas PA601 にも：パンフレット (2 ページ), パンフレット＆スペック (10 ページ)

ページを印刷する

PA601 COMMERCIAL AMPLIFIER

REAR PANEL DESCRIPTION

6. Balanced Input

Balanced line level signals connect to the (+), (–), and (G) terminals. Note if you are connecting an

unbalanced line level input, tie (short) the (G) and (–) terminals together with an insulated jumper

wire.

7. Line In

The Line In connector is useful for receiving a -6dBV mono unbalanced line level signal from a

playback system such as a CD player.

8. Line Out

Line Out connector is useful for providing unbalanced line level signal to another amplifier or other

external device.

9. Loudness Contour EQ

This switch, when in the ON position, provides +4dB of boost at 100Hz and 8kHz. Use of this EQ is

suggested to enhance music playback at low levels.

10. Output Terminal Strip

For loudspeaker connections, connect as follows or proceed to the setup section for typical wiring

schemes.

COM - Speaker common or negative connection

4Ω - Connect to direct coupled loudspeakers

70V - Connect to transformer coupled, 70.7V loudspeakers with a total load impedance of 83Ω

100V - Connect to transformer coupled, 100V loudspeakers with a total load impedance of 167Ω

11. IEC AC Receptacle

Prior to connecting a grounded power cord the proper selection of the AC Line switch and fuse must be

made. For 120VAC use the 1.6A/250V fuse and for 230~240VAC use the 1A250V fuse.

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •

120V/230V-240V

Speaker Output 60W

COM

FUSE

0.8A/250V FOR 230V~240V

CLASS 2 WIRING

1.5A/250V FOR 120V

Specifications are subject to change without notice

AtlasSound.com

Printed in U.S.A.

Line In

70V

100V

Unbalanced

Off

Loudness

Line Out

TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

00106

OWNER'S MANUAL

Balanced

Line Input

–

ATS002264 RevA 01/06