リフティングシステム Atlas 9KBPのPDF ハウ・トゥ・ドゥをオンラインで閲覧またはダウンロードできます。Atlas 9KBP 2 ページ。 Procedure for bleeding the cylinders of all chain-over-roller style lifts

PROCEDURE FOR BLEEDING THE CYLINDERS

OF ALL CHAIN-OVER-ROLLER STYLE LIFTS

Current Atlas model chain-over-roller cylinder lifts include:

BP8000, 9KBP, BP9000, BP10000, BP12000, 9KOH, 9OHSC

PERFORM THIS PROCEDURE IMMEDIATELY AFTER INSTALLATION

1. Press the UP Button to raise

the Carriages (part to which

the arms attach inside both

Columns) about 18" off the

fl oor. DO NOT RAISE THE

CARRIAGES TO MAXIMUM

HEIGHT, JUST ENOUGH TO

REMOVE ANY SLACK FROM

THE CHAIN.

2. Disengage the Safety Locks on both Columns using

the Single Point Release Handle near the power unit

or by pulling the two Manual Release Cables located

on each carriage (depending on model of 2 Post Lift

you have). Depress the Lowering Valve handle and lower the arms completely to

the fl oor. Once the lift arms are resting on the ground maintain pressure on the

lowering valve handle for several seconds more.

Single Point Release Handle

(Removing air from the hydraulic system)

and BEFORE YOU PUT A VEHICLE ON THE LIFT

Manual Release Cable

Lowering Valve