コントロールパネル AirTechnic AIRZONE UNOのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。AirTechnic AIRZONE UNO 5 ページ。

ΑIRTECHNIC

1. HARDWARE LAYOUT

N-L-Earth:

T1:

6-wired input, for interconnection with the system's thermostat. I t allows the

communication with the zone's control on the demand/ no-demand state in order the

set-point temperature to be established.

2-wired input, for provision of the motor's supply of the control element (Grill or

power driven damper).

RL 1:

The electronic control panel has 1 voltage free relay, which acts as a dry

contact. I t is normally open and switches on, switches off according to the operation

mode set by the system's thermostat. Cabling of the relay will take place with Airzone

Type B Cable and in a tube separate from the rest of the cables connecting to the

electronic control panel.

2. POWER SUPPLY CONNECTION

The electronic control panel is supplied with 12Volts of direct current, supplied by a stabilized

Airzone source connected to the electricity supply with the European Union standard voltage

level: 230 volts of alternate current 50Hz.

3. THERMOSTAT

Airzone Free

Airzone Tacto Cordless

Airzone Cordless

The Free, Tacto Cordless or Cordless thermostats communicate by infra red rays with

receivers which are connected by type A cable to the electronic control panel in the following

way:

INTELLIGENT AIR-CONDITIONING

AIRZONE UNO – INSTALLATION MANUAL

UNO BOARD INSTALLATION INDEX

Direct input with 230VAC-50Hz European Union standard voltage.

Page 1