ページを印刷するA. BATTERY REPLACEMENT:
A .5V type AAA Alkaline battery powers the Remote Transceiver. When the power of the battery
weakens a
icon shall be displayed on the LCD screen. When the old battery is replaced to new
one, there will be beep sounds indicate the power is up and the clock on the LCD screen returns to
Am12:00 after displaying all the icons. Correct the time by pressing F for seconds before using
(See Timer Setting).
B. THE REMOTE LCD ICONS WITH FUNCTION
door Lock
Your vehicle doors are locked
ARM
Armed mode
Your vehicle is in armed mode
remote Transmission
You are transmitting the signal to
control unit
door Open Warning
Doors are illegally opened (zone )
Shock Sensor Trigger
Trigger on Shock Sensor (zone 4)
8
Note: Press the button
two times when the
battery compartment is
empty, then insert the new
battery.
door Unlock
Your vehicle doors are unlocked
and the system is Disarmed
Valet mode
All the function shall be temporar-
ily on hold
In - range Indicator
Your are within the remote control
range.
Trunk/hood Trigger
Trunk or Hood is illegally opened
(zone )
Warn Away Trigger
Trigger on Shock Sensor (zone )
Engine Starting
Your vehicle wngine starting by
remote control
¿
Timer Control Start
Engine will start automatically at
the same time next day or every
/-hour.
C3
Activate Channel 3
(Trunk Release).
C5
Activate Channel 5
Time monitor
Count down (parking) Timer
Reminder when time is up for
parking
driver paging
Someone is paging you in front of
your vehicle
C. PROGRAMMING OF THE LCD REMOTE TRANSMITTER:
Transmitter Button
Description
F ( second)
LCD screen lamp turns on for
5 seconds
F ( seconds)
Timer Programming Mode
F - F - F
Clear the Flashing Icon and
Melody Sound on the LCD
Screen Transmitter
F - (-second)
Melody / Vibration (
Engine running
Your vehicle's engine is running
Temperature monitor
Indoor temperature for your
vehicle
C4
Activate Channel 4
C6
Activate Channel 6
Alert Alarm
You have set morning call alarm
Vibration mode
Remote Control vibrates when the
system is triggered
Low Battery
You have to replace the battery of
remote control.
Operation
Press and hold for second
melody sound to confirm
enters
Press and hold for seconds
-melody sounds to confirm
enter
Press within seconds
) Mode Press within seconds
9