- ページ 4

スピーカー Bose Home Speaker 300のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Bose Home Speaker 300 41 ページ。
Bose Home Speaker 300 にも：マニュアル (4 ページ), クイック・スタート・マニュアル (8 ページ)

ページを印刷する

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Bose Corporation could void the user's authority to operate this

equipment.

This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment should be installed and operated with a minimum distance of 20 cm between radiator and your body.

This device for operation in the band 5150 – 5250 MHz is only for indoor use to reduce the potential for harmful

interference to other co-channel systems.

CAN ICES-3 (B)/NMB-3(B)

Bose Corporation hereby declares that this product is in compliance with the essential requirements and

other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The

complete declaration of conformity can be found at: www.Bose.com/compliance

The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is

in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation

(EU) No. 801/2013.

Required Power State Information

Power consumption in specified power mode, at 230V/50Hz input

Time after which equipment is automatically switched into mode

Power consumption in networked standby if all wired network

ports are connected and all wireless network ports are activated,

at 230V/50Hz input

Network port deactivation/activation procedures. Deactivating all

networks will enable standby mode.

REG U LATO RY I N FORMAT IO N

Power Modes

Standby

≤ 0.5 W

< 2.5 hours

N/A

Wi-Fi

: Deactivate by pressing and holding the Play/Pause

and Bluetooth buttons simultaneously for at least 5 seconds.

Repeat to activate.

Bluetooth

: Deactivate by clearing the pairing list by

pressing and holding the Bluetooth

Activate by pairing with a Bluetooth source.

E N G

Networked Standby

Wi-Fi®, Bluetooth® ≤ 2.0 W

≤ 20 minutes

≤ 2.0 W

button for 10 seconds.