- ページ 15

ドリル Atlas Copco LCD 1500のPDF 安全および取扱説明書をオンラインで閲覧またはダウンロードできます。Atlas Copco LCD 1500 20 ページ。 Hydraulic core drill

ページを印刷する

LCD 500, 1500

Maintenance

Regular maintenance is a basic requirement for the

continued safe and efficient use of the machine.

Follow the maintenance instructions carefully.

♦

Before starting maintenance on the machine, clean

it in order to avoid exposure to hazardous

substances. See "Dust and fume hazards"

♦

Use only authorised parts. Any damage or

malfunction caused by the use of unauthorised

parts is not covered by warranty or product liability.

♦

When cleaning mechanical parts with solvent,

comply with appropriate health and safety

regulations and ensure there is satisfactory

ventilation.

♦

For major service of the machine, contact the

nearest authorised workshop.

♦

After each service, check that the machine's

vibration level is normal. If not, contact the nearest

authorised workshop.

Every day

Clean and inspect the machine and its functions

♦

each day before the work commences.

Conduct a general inspection for leaks and

♦

damage.

Check the function of the trigger. Make sure that

♦

it returns to its stop position when it is released.

Periodic maintenance

After each operating period of approximately 100

working hours or three times a year the machine

must be dismantled and all parts be cleaned and

checked. This work must be performed by authorized

staff, trained for this task.

Storage

♦

Check that the machine is properly cleaned before

storage.

♦

Store the machine in a dry place.

♦

Keep the machine and tools in a safe place, out

of the reach of children and locked up.

Original instructions

Safety and operating instructions

Disposal

A used machine must be treated and disposed of in

such a way that the greatest possible portion of the

material can be recycled and any negative influence

on the environment is kept as low as possible, and

in respect to local restrictions.