- ページ 14

スピーカーシステム Bose 131のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose 131 18 ページ。 Marine loudspeaker system
Bose 131 にも：オーナーズマニュアル (37 ページ), オーナーズマニュアル (23 ページ), サービスマニュアル (7 ページ), サービスマニュアル (7 ページ), マニュアル (7 ページ)

Installing Your Speakers From The Front Of The Bulkhead

Tie a knot in each joined wire pair to protect the

B 10

connection from being pulled apart.

Reinsert the enclosure into the wall in the position

B 11

you determined in Step 7. If the outside circle of

holes in the mounting flange line up with the ones

you originally marked, remove the enclosure

and drill at these marks. If they do not, make new

markings that you can differentiate from your original

set of markings.

B 12

Remove the speaker enclosure.

CAUTION: Do not drill while the speaker enclosure

is in place.

Drill six

⁄

inch (.32 cm) holes.

B 13

Reinsert the speaker enclosure.

B 14

Note: For added protection against water enter-

ing the bulkhead, you can apply a generic silicone

sealant between the flange and the mounting

surface.

October 30, 2001

AM188201_02_V.pdf