- ページ 6

スピーカーシステム Bose 151のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose 151 19 ページ。 Environmental
Bose 151 にも：オーナーズマニュアル (12 ページ), サービスマニュアル (11 ページ)

ページを印刷する

Use the cord properly

Speaker cord consists of two insulated

wires The insulation around one wire is

striped, collared, or ribbed This marked

wire is always positive (+) The plain wire is

always

negative (-) These correspond to the red

(+) and black (-) terminals on the back of

the speaker, receiver, or amplifier Be sure

to connect each wire to the proper terminal

(positive to positive, negative to negative)

•

Prepare the ends of each cord

At the ends of each cord, strip approxi-

mately

1/2 inch (12 mm) of insulation from both

wires Twist the bare ends of each wire

• Connect the cords to your speakers

At the back of your speaker, unscrew the

hex knob on one terminal post This reveals

a small opening through the post Insert the

bare end of one wire into the opening

Tighten the knob to secure the wire Now

insert the second wire into the second

terminal post (see Figure 2)

•

Protect the cord

To guard against weather wear on exposed

wires, see "How to maintain Bose® 151 ®

speakers" on page 8

Make the connections

1. Connect the first cord to the left channel

of your receiver or amplifier

Attach the marked wire at one end to

the red (+) terminal

Attach the plain wire at that end to the

black (-) terminal

2. Connect the other end of the same cord

to your left speaker

Attach the marked wire to the red (+)

terminal post

b Attach the plain wire to the black (-)

terminal post

Connect the second cord to the right

channel and right speaker, following the

same procedure

Insert the bare wire end into the opening on the terminal post