- ページ 8

スピーカーシステム Bose Acoustimass 15のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose Acoustimass 15 18 ページ。 Bose owner's manual home entertainment speaker systems acoustimass 15 series ii, acoustimass 16
Bose Acoustimass 15 にも：オーナーズマニュアル (18 ページ), オーナーズマニュアル (16 ページ)

ページを印刷する

Setting Up

Connecting the speakers

Figure 5

Cube speaker array

connections to the

Acoustimass module

CAUTION: Never connect the cube speaker arrays directly to a receiver output. Always con-

nect them to the powered Acoustimass

CAUTION: Never use broken or frayed wiring, which can result in electrical shock or damage

to your system. The supplied cables are not intended for in-wall installation. Check local

building codes or enlist a qualiﬁed installer.

Connecting front cube speaker arrays to the Acoustimass module

Three individual 20-foot (6.1m) speaker cables connect the center, right, and left front cube

speaker arrays to the Acoustimass module (Figure 5). Be sure to match the correct cable with

the corresponding speaker location. Front speaker cables have blue RCA connectors at one

end with L (left), R (right), or C (center) molded into the connectors. The other ends of the

cables have two wires. The red collars on the + wire are labeled LEFT , RIGHT , or CENTER .

Note: The center rear cube speaker array is included with the Acoustimass 16 system or may

be added to an Acoustimass 15 Series II system. For upgrading information, see "Upgrading

your Acoustimass 15 Series II speaker system" on page 12.

AM264924_00 _V.pdf • August 13, 2002

module, then connect the module to the receiver.