- ページ 12

スピーカーシステム Bose Acoustimass 6 Series IIIのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose Acoustimass 6 Series III 25 ページ。 Home theater speaker sytem
Bose Acoustimass 6 Series III にも：オーナーズマニュアル (18 ページ), クイック・セットアップ・マニュアル (1 ページ), オーナーズマニュアル (44 ページ), オーナーズマニュアル (16 ページ), オーナーズマニュアル (23 ページ)

SING

OUR

YSTEM

Setting your digital surround sound receiver

Figure 10

Digital signal receiver

connections

Speakers in your Acoustimass

compatible with the audio output of digital surround receivers. The system's integrated signal

processing supports full low-frequency reproduction from all channels.

To gain complete advantage of these system capabilities, you may want to adjust some

settings on your receiver. To make changes, use the digital display menu on the receiver and

refer to the list of recommended settings, below.

Speaker

• Left and right

• Center

• Left and right surround

• LFE/Subwoofer

Note: If your receiver provides it, the LFE or Subwoofer option setting should be ON and the

crossover value at the lowest number possible, which is typically 80 Hz.

For the digital audio signal from your DVD player to reach your surround receiver, you need a

digital audio connection between the DVD player and receiver (Figure 10).

1. Use either the Optical or Coaxial input (not both) on the receiver to connect to the digital

output from the DVD.

2. Be sure to select the digital output in the setup menu of your DVD player.

For additional setup and operating information, please refer to the owner's guide that came

with your surround receiver.

Use one or the other,

NOT both

For analog (non-digital) surround sound applications, we recommend that you set the

surround sound center mode of your receiver to Wide. For instructions on how to change this

setting, refer to the owner's guide provided with your surround receiver.

Français

6 Series III or Acoustimass 10 Series IV system are fully

Receiver setting

LARGE

Español

English