- ページ 11

スピーカーシステム Bose Acoustimass Bass SystemのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose Acoustimass Bass System 18 ページ。 Wireless bass module
Bose Acoustimass Bass System にも：オーナーズマニュアル (11 ページ), オーナーズマニュアル (13 ページ), オーナーズマニュアル (6 ページ), オーナーズマニュアル (24 ページ), クイック・スタート・マニュアル (2 ページ)

Check the connections

Figure 6

Completed connections

Figure 7

Turn on the Powered Acousti-

mass module

AM194452_06_V.pdf

Check all connections from the receiver to the Powered Acoustimass module and from the

module to the cube arrays (Figure 6). Make sure all cube arrays are connected to the proper

terminals according to their position in your room. Check that all wires are connected in

phase (+ to + and – to –). Incorrect wiring can result in a total loss of module output. Correct

wiring problems before you plug your receiver in and turn it on.

FRONT SPEAKE

FRONT SPEAKERS

When you have checked all connections, plug in the power cord of the Powered Acousti-

mass module. Be sure to turn the power switch on (Figure 7). It is not necessary to turn the

module off after each use. The speaker system turns on and off automatically as it receives a

signal from the receiver. Turn the system off at the receiver.

October 22, 2001

SURROUND SPEAKERS

LFE/SUBWOOFER

OUT

REAR

CENTER

Setting Up