- ページ 5

パワードライバー Atlas Copco 8432081580のPDF 製品取扱説明書をオンラインで閲覧またはダウンロードできます。Atlas Copco 8432081580 12 ページ。

ETD M80ABL V2

Bit run out test

Bit run out is measured with the tool securely fastened in a test rig and with the tool running at no load

with a rotation speed of 200 rpm. Measuring point is at 44 mm (length of a standard bit) out on a special

bit 4216 2194 00. Bit run out limit is 0.15 mm.

Preventive maintenance is recommended at regular intervals. See the detailed information on preventive

maintenance. If the product is not working properly, take it out of service and inspect it.

If no detailed information about preventive maintenance is included, follow these general guide-

lines:

■

Clean appropriate parts accurately

■

Replace any defective or worn parts

Recommended interval between actions:

Valid at normal usage of the tool at a load up to 70% of maximum torque.

Service should only be carried out by trained technician following provided service instructions and

using original Atlas Copco spare parts.

Product Information