- ページ 23

ヘッドフォン Bose Lifestyle 35 Series IIのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Bose Lifestyle 35 Series II 36 ページ。 Noise cancelling
Bose Lifestyle 35 Series II にも：インストレーション・マニュアル (42 ページ), オーナーズマニュアル (25 ページ), オーナーズマニュアル (24 ページ), オーナーズマニュアル (13 ページ), クイック・セットアップ・マニュアル (3 ページ), 取扱説明書 (46 ページ), オーナーズマニュアル (36 ページ), オーナーズマニュアル (32 ページ), クイック・スタート・マニュアル (2 ページ), ファクトリーリセット (2 ページ), クイック・スタート・マニュアル (2 ページ), オーナーズマニュアル (38 ページ)

Installing the TV on/off sensor

Figure 19

TV on/off sensor installed

on your TV

The TV on/off sensor enables the system to automatically switch the TV on, as needed, when

another video source (DVD, cable/satellite box, etc.) is selected. If you choose not to use the

sensor, you need to turn on your TV separately. See Figure 19.

Note: The TV on/off sensor is not included on LIFESTYLE

connectors.

With larger TVs you may want a second person to help as you follow the steps below:

1. Plug the sensor cord connector into the TV SENSOR jack on the media center.

2. Temporarily position the TV on/off sensor on the back of your TV as shown in Figure 19.

3. Test the sensor and enable the feature. See "Programming your LIFESTYLE

remote to control your TV" in your Operating Guide.

A. Turn the TV on. Press the System button on the LIFESTYLE

Access Video/TV power status.

B. As one person moves the sensor near the rear vent area of the TV, another person

observes when TV Power Status changes from "TV not detected" to "TV ON".

C. In the menu navigate to TV Power (directly above TV Power Status).

Change this from "Manual" to "Automatic."

D. You will need to select the TV brand and device code, as explained in the guide.

Note: DO NOT use the mounting strip to permanently mount the sensor until you have tested

and enabled this automatic feature as explained in the Operating Guide.

Rear of TV

TV on/off sensor

Note: For a projection TV, the bottom rear of the enclosure is the best location for mounting

the sensor. Front projectors that use a separate screen may need to be turned on and off

manually.

System Installation

systems that use SCART

system

system remote.

Mounting strip

for attaching

the sensor

TV sensor jack

Media center

connection

panel