Adjusting the display
brightness
The brightness level of the display automatically adjusts
itself for low and high ambient light conditions. This
feature brightens the display for better visibility in high
ambient light conditions and dims the display making it
less intrusive in low ambient light conditions. High and
low brightness settings can be set independently.
1. Press and hold Alarm Setup (Menu)
until -SETUP MENU- is displayed.
>
2. Press Tune/MP3
BRIGHT HI- is displayed.
3. Press Time – or Time + to set the
high display brightness level to a
value from 8-15.
>
4. Press Tune/MP3
BRIGHT LO- is displayed.
5. Press Time – or Time + to set the
low display brightness level from 1-8.
6. Press Alarm Setup (Menu) to exit
the setup menu or wait 10 seconds for
the setup menu to exit automatically.
Setting the room code
music system III comes from the factory
®
Your Wave
ready to operate as a second room (room code B) when
®
connected to a Bose
link enabled Lifestyle
you want to use your Wave
Lifestyle
®
system beyond a second room you will need to
change the room code to match that of the remote
control you are using for that room.
®
Refer to your Lifestyle
system owner's guide for more
information on room codes.
1. Press and hold Alarm Setup (Menu)
until -SETUP MENU- is displayed.
>
2. Press Tune/MP3
ROOM- B
dashes following the room letter indi-
cate how the microswitches should
be set on the Lifestyle
control.
five times until
once until
®
system. If
music system III with your
®
seven times until
is displayed. The
®
remote
P
ERSONALIZING
3. Press Time – or Time + to select a
room code other than room B.
4. Press Alarm Setup (Menu) to exit
the setup menu or wait 10 seconds for
the setup menu to exit automatically.
Turning the touch pad
on or off
If you do not wish to use the touch pad feature you can
turn it off.
1. Press and hold Alarm Setup (Menu)
until -SETUP MENU- is displayed.
>
2. Press Tune/MP3
TOUCH PAD- is displayed.
3. Press Time – or Time + to select
OFF or ON.
4. Press Alarm Setup (Menu) to exit
the setup menu or wait 10 seconds for
the setup menu to exit automatically.
Changing the system
standby timeout
1. Press and hold Alarm Setup (Menu)
until -SETUP MENU- is displayed.
>
2. Press Tune/MP3
AUTO OFF- is displayed.
3. Press Time – or Time + to select NO
or YES.
4. Press Alarm Setup (Menu) to exit
the setup menu or wait 10 seconds for
the setup menu to exit automatically.
Y
W
®
M
S
OUR
AVE
USIC
YSTEM
eight times until
nine times until
English – 19
III
ページを印刷する