- ページ 9

録音機器 Advanced Radio Air SafeのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Advanced Radio Air Safe 12 ページ。 Failsafe gear sequencer

Sequencer Step Programming

The current step being programmed is shown

in the top right corner of the screen. There

are 5 steps available for sequencing and each

of the 6 outputs can be programmed in the

up or down state in each step.

To move between steps, highlight the

"RETURN STEP" (Row at the top) and use

the Joystick right or left click to move between sequence steps.

Please note: Sequence step positions can only be changed when the cursor is highlighting

the "RETURN STEP" menu item at the top of the screen.

Joystick → RIGHT Arrow — Increases the step number.

Joystick ← LEFT Arrow — Decreases the step number.

DELAY 1.0 SEC — places a pause at the end of the step. This can be used to allow for exam-

ple gear to come up or doors to open before the next step in the sequence takes place. Delays

the step after the Decreases a value.

OUTPUT 1—6 — highlight and of the output rows to chang the output position. Moving the

joystick right or left on any output row will toggle the UP/DOWN state of the selected output.

Hint: To manually test the sequencer highlight the "RETURN" and press (push down) the

joystick. Then use the manual UP/DOWN function to test the up and down function of the

sequencer. You can of course also use the transmitter to test the sequencer.

Please note: The Air Safe Sequencer Arms From Gear Switch Down position

(Factory Default). This means the gear switch must be moved to the down posi-

tion before the sequencer will arm i.e. any sequence function will operate.

Screens and Usage

RETURN

DELAY

1.0

OUTPUT

UP-5

SEC

DOWN