- ページ 6

ホームシアターシステム Bose Acoustimass16 Series IIのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose Acoustimass16 Series II 15 ページ。 Home entertainment speaker system
Bose Acoustimass16 Series II にも：オーナーズマニュアル (24 ページ)

ページを印刷する

ETTING

Bose

wall brackets and floor or table stands expand the options for placement of your

speakers. For further information, see "Accessories" on page 14.

Note: The Acoustimass

15 Series III system is designed for use with an optional center rear

cube speaker array. For further details, see "Optional upgrade for your Acoustimass 15 system"

on page 10.

Placing the center front speaker

Sound from the center front speaker should seem to come from within the picture to give the

most realistic performance of on-screen action and dialogue.

• Place the center front speaker above, on top of, or below your television. Do NOT rest the

weight of the television on the speaker.

• Keep it in line with the vertical center of the screen, if possible, for the most accurate

reproduction of dialogue (as shown in Figure 2 on page 5).

CAUTION: Before placing the center front speaker on top of a television, attach the four

supplied rubber feet to the bottom of the speaker. Position two of the feet near the front edge and

close together on the bottom surface. Place the other two feet in the rear corners on the bottom.

Placing your left and right front speakers

The goal for these speakers is to create a sound image that is wider than the screen and

seems natural to viewers sitting anywhere in the room.

• Place the front cube speaker arrays on either side of your TV.

• Keep them from 6 feet (2 m) to 15 feet (5 m) apart (as shown in Figure 2 on page 5).

Placing your rear speakers

While the rear (surround) speakers may deliver some dialogue, they serve primarily to

deliver discrete sounds and special effects that expand the visual image. They help bring the

viewer into the center of the action.

Choose locations that are practical and convenient, while considering these recommended

guidelines:

• Position the left and right rear cube speaker arrays so they can deliver sound on both sides

of the viewer, rather than from directly behind (as shown in Figure 2 on page 5).

• Place these speakers at the same height as the ears of a seated viewer or higher.

• Rotate the top and bottom cubes of each speaker to direct the sound to both the front

and the back of listeners.

• If your system has a center rear speaker, position it halfway between the rear left and right

speakers (as shown in Figure 2 on page 5).

Français

Español

English