- ページ 31
ホームシアターシステム Bose CineMAte 520のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Bose CineMAte 520 49 ページ。 Soundtouch series ii wireless adapter
Bose CineMAte 520 にも： オーナーズマニュアル (34 ページ), ユーザーマニュアル (6 ページ), オーナーズマニュアル (22 ページ), クイック・スタート・マニュアル (2 ページ)
ページを印刷する
Care and Maintenance
Problem
What to do
Poor or
• Remove all protective films from the system.
distorted
• Secure all cable connections on the speakers, TV, and connected sources.
sound
• If you see the error message Cannot find Acoustimass:
- Plug in the Acoustimass
- Pair the Acoustimass module with the console (see "If your console
cannot find the Acoustimass
• If using the analog or
• Factory reset the system (see page 31) and run the ADAPTiQ
calibration (see page 19).
Intermittent
• Secure all cable connections on the speakers, TV, and connected sources.
sound
• Move system away from potential interference, such as a wireless router,
cordless phone, television, microwave, etc.
If your console cannot find the Acoustimass
The Acoustimass module and console are paired at the factory. However, if you
see the error message Cannot find Acoustimass on the display, perform this
pairing procedure:
1.
Unplug the Acoustimass module.
2.
Press
on the remote control.
3.
Press
until 15 PAIR ACOUSTIMASS appears on the display.
4.
Press
.
Plug in Acoustimass appears on the display.
5.
Plug the AC power cord into an AC (mains) outlet.
After the Acoustimass module connects to the console, Pairing complete
appears on the display.
30 - English
®
module.
®
module").
connector, decrease the volume on your source.
®
audio
®
module