Reference
Connecting your cable/satellite box to the system
Figure 22
Set top box and VCR
Cable TV,
satellite, or
antenna
cable
26
There are various ways to make the cable/satellite connections:
1. Connect cable/satellite L & R Audio OUT to the L & R Audio IN jacks on the media center.
• If the cable/satellite box has a DIGITAL Audio OUT jack, connect it to the CBL/SAT
DIGITAL Audio IN jack on the media center.
2. If the cable/satellite box has an S-VIDEO OUT jack, connect it to the S-VIDEO IN jack on
the media center. Use another S-VIDEO cable to connect the S-VIDEO OUT jack on the
media center to an S-VIDEO jack on the TV.
• If the cable satellite box has only a composite VIDEO OUT jack, connect that to the
composite VIDEO IN jack on the media center.
Connect a VCR to this system as follows:
1. If your cable satellite box has an additional set of Audio and VIDEO OUT jacks connect
them to the corresponding Audio and VIDEO IN jacks on your VCR.
2. Connect the VCR to the VIDEO IN jack on the media center. If that jack is unavailable,
connect the VCR directly to the TV.
In Figure 22, select Input 2 on your TV to watch cable/satellite programs. Select the CBL/SAT
sound source. This input will also provide better video quality when watching DVDs. To watch
videotapes, select Input 1 on your TV (or the TV input to which you directly connected the
VCR) and select the VCR sound source.
Note: Additional cables may be purchased at an electronics store or authorized Bose
If the CBL/SAT box has only a composite
VIDEO OUT jack, connect that to the com-
posite VIDEO IN jack on the media cen-
ter.Connect the VCR composite VIDEO OUT
directly to the TV.
®
dealer.
ページを印刷する