- ページ 12
ステレオシステム Bose SoundDock 10 BluetoothのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Bose SoundDock 10 Bluetooth 41 ページ。 Digital music system
Bose SoundDock 10 Bluetooth にも: オーナーズマニュアル (41 ページ), オーナーズマニュアル (15 ページ), オーナーズマニュアル (15 ページ), オーナーズマニュアル (14 ページ), オーナーズマニュアル (17 ページ), オーナーズマニュアル (24 ページ), クイック・スタート・マニュアル (31 ページ)
TAB 8, 16
TAB 7, 15
®
T
S
D
10 D
HE
OUND
OCK
IGITAL
Problem
I do not hear any sound
from the SoundDock 10
system.
My iPod is not charging.
I cannot navigate the
playlists on my iPod.
My iPod does not respond
to the remote control.
My system does not
respond to any controls.
8
TAB 6, 14
TAB 5, 13
M
S
USIC
YSTEM
• Make sure the power cord is properly connected on the back of the SoundDock 10 system and that
the system is plugged into a live AC outlet.
• Press the source button (dock or AUX) on the remote for the source you are using.
• Press the Play/Pause button on the remote control.
• Increase the system volume.
• If listening to a device connected to AUX IN, increase the volume on the device.
• Remove your iPod from the dock, wait 5 seconds, then reseat it.
• Unplug the power cable for 1 minute, then plug it back in to reset the system.
• Make sure the power cord is properly connected on the back of the unit.
• Make sure the system is plugged into a live AC outlet.
• Make sure that you have created playlists on your iPod.
• Make sure there is a clear path between the remote and the system.
• Using a clean, dry cloth, wipe the small lens on the front end of the remote.
• Try the remote from a different location. You may be experiencing interference from bright room
lights or sunlight.
• Remove your iPod from the dock, wait 5 seconds, then reseat it.
• Make sure the remote battery is installed correctly or replace it if it is old (refer to page 6).
• Unplug the power cable for 1 minute, then plug it back in to reset the system.
®
• Contact Bose
Customer Service.
TAB 4, 12
TAB 3, 11
What to do
TAB 2, 10
English