- ページ 15

English

TAB 2, 10

4. Plug the battery into the multi-pin connector.

5. Push in the slotted knob and turn it clockwise until

the slot is vertical.

6. Connect the power supply and charge the battery.

Replacing the remote battery

When the remote stops operating or its range seems

reduced, it is time to change the remote battery. Replace

it with type CR2032 or DL2032.

1. Using a coin, turn the battery

cover slightly counterclockwise.

2. Remove the used battery and

insert the new one. Be sure the

battery is plus (+) side up.

3. Reseat the cover and turn it

clockwise until it locks into place.

TAB 3, 11

TAB 4, 12

TAB 5, 13

TAB 6, 14

WARNINGS:

• Keep the remote control battery away from children. It may

cause a fire or chemical burn if mishandled. Do not recharge,

disassemble, heat above 100ºC (212ºF), or incinerate.

• Dispose of used batteries promptly. Replace only with a battery

of the correct type and model number.

• Danger of explosion if battery is incorrectly replaced. Replace

only with Duracell, Eveready, Energizer, Maxell, Toshiba, or

Shun Wo CR2032 or DL2032 3-volt lithium battery.

Cleaning

To clean the exterior surface of your product, you can

wipe it using a soft, dry cloth. You can also lightly

vacuum the grille.

• Do not use solvents, chemicals, or sprays.

• Do not allow liquids to spill or objects to drop into any

openings.

If you experience difficulty with your SoundLink™

wireless music system, use the following table to try

to solve the problem. If the problem persists, see

"Contacting customer service" on page 14.

TAB 7, 15

TAB 8, 16

ARE AND

AINTENANCE