- ページ 11

To turn the system on

There are two ways to turn the system on

• On the remote, press the power button.

• On your iPad, iPhone, iPod touch or computer running iTunes, start streaming

AirPlay audio.

When the system turns on, the Wi-Fi indicator changes from dim blue to bright blue,

indicating that your system has a Wi-Fi connection.

To turn the system off

On the remote, press the power button to turn the system off.

The Wi-Fi indicator will change to a dim blue. This indicates that the system is

maintaining the connection to your Wi-Fi network while it is off.

Note:

After 20 minutes of no activity, the system automatically turns off. If there is no Wi-Fi connection

when the 20-minute time-out occurs, the system automatically switches to the Power Saving mode

(see "Power saving mode" on page 18). When turning the system on from this mode, you will experi-

ence a slight delay before hearing audio.

Volume controls are located on the remote and on the right-hand side of the speaker.

You can also use the volume controls on your AirPlay compatible device.

• To increase the volume, press plus (+) ; to decrease, press minus (–)

• To silence the speaker, press mute. Press again to unmute. When muted, the

front panel mute icon glows white

Note:

The front panel indicator for the selected source (

verify the command.

After connecting to your wireless router, the SoundLink

to stream AirPlay audio at any time. If an AUX source is connected and playing when you

begin streaming audio from your AirPlay compatible device, that source stops and you

will hear the AirPlay audio stream.

or AUX) blinks with every button press to

Air digital music system is ready

PERATION

English – 11