- ページ 18

Using the CD player

Lift the CD door (as shown). Place the CD, label-side up, on the spindle in the CD well. Gently

lower the door more than halfway, until it begins to close by itself. Or continue to close it

manually if you prefer.

Figure

Setting up a CD

Function

To turn

on/off - Press On/Off once to turn on or off. The system turns

on to the last source played. Or, press CD Play _ II to turn on the CD

player. In CD mode, the CD begins to play as soon as you load a disc

and close the CD door.

To play or pause the CD - Press CD Play _" | | to play the CD. The

play/pause I_lights. While playing, press CD Play 1_ || to pause the CD.

The play/pause I_flashes. After 10 minutes paused, the system shuts

off.

To step the CD - Press CD Stop II. The display briefly shows the

disc's total playing time. The number of tracks also shows.

To select

a track

- In CD mode, press either Track/Tune <_ or _>

until the desired track is selected.

Pressing Track/Tune <q skips back to the beginning of the current track. A

second press within 2 seconds skips to the beginning of the previous track.

Pressing Track/Tune <:1 at the beginning of the disc skips to the last track.

Pressing Track/Tune _> at the end of the disc skips to track 1.

To scan through a CD while

playing - Press and hold

Track/Tune <_ or _> to scan through a track. Release the button to

stop. The display shows the track and playing time. After scanning,

wait 2 seconds to return to track selection.

Track/Tune

Track, Tune

To scan through a CD while paused - Press and hold Track/Tune

or _ to scan to the desired location. The play/pause ll_flashes.

Press CD Play I_ || to start at the selected position. Or, after scanning,

wait 2 seconds to return to track selection.

Tn,_ck/T_une

To scan through

a CD while stopped - Press Track/Tune <:1or _

_,_ok _,.r,o

once to change from total tracks display to track 1. Press and hold

Track/Tune <q or _ to scan to the desired location. Press CD Play I_ | |

to start at the selected position. Or, after scanning, wait 2 seconds to

return to track selection.